jthomas
Previous Page in CatalogRubber Cutting Edges
a

Snow Pushers & Back Drag Blades

To order parts click on the order number in the breakdown boxes
Contact Us: 43500 Gen Mar, Novi, MI 48375 - Telephone: 1-800-828-7980 - Fax: 1-800-422-4184- Email: sales@j-thomas.com
Copyright © 2009 - J.Thomas Distributors LLC - All rights reserved.

a

380 J. THOMAS SELLS THE HIGHEST QUALITY PARTS AT THE BEST POSSIBLE PRICES! Filters SNOW PUSHERS Equipment
Replacement
Parts
Engines, Trans,
Hydro Pumps
Zero Flats Blades & Belts
& Tires
Two Cycle Lawn Care Accessories
Parts
Clear tight and hard to reach areas fast, save time,
fuel and money, no turnaround time necessary.
Keeps rear end available for other snow plow accessories.
Snow operations stay in front for clear vision. PullBackBlade
is able to break ice and hard snow packs, reach loading
docks, garages, overhead doors or dead-end driveways with
ease. Reinforce OEM plows with an Avenger PullBackBlade!
Powder Coated • Bolt-On • Patented
PULL BACK BLADES
ORDER NO. DESCRIPTION PRICE
Western
BD-16 7.6 Pro $292.40
BD-17 8.0 Pro 292.40
Meyer
BD-19 7.6 $286.83
BD-20 8.0 $292.40
Boss Straight Blade
BD-21 7.6 292.40
BD-22 8.0 292.40
BD-23 8.6 292.40
SNOW PUSHER
REPLACEMENT PARTS
Rubber:
• Lower cost
• Acts like a squeegee
• Cleans better in slush
areas
Polyurethane:
• Better abrasion resistance
(less wear)
• Stronger against ripping
and tearing
• Stiffer material to clean
down to surface when
snow is compacted
REPLACEMENT RUBBER EDGES
Bulk – No Holes
RUBBER VS POLYURETHANE
POLYURETHANE CUTTING EDGES
Bulk
PART NO. SIZE COST PER FOOT
MB-226 1" x 10" $15.96
MB-230 1-1/2" x 10" 25.79
JTH-138 1-1/2" x 10" x 11-1/2' (Fit 12')* $664.17
JTH-48 1-1/2" x 10" x 4' 164.14
JTH-24 1-1/2" x 10" x 2' 82.08
NOTE: 11-1/2' fits a 12' blade. Use this as a base to order other sizes.
Example: 16' would be 1 (12') + 1 (4') edge.
* Plus Shipping
PART NO. SIZE COST PER SECTION
Prevent wintertime freeze-up with
Arctic Avenger® hydraulic fluid.
• Snow Plow Systems
• Salt and Sand Spreaders
Arctic Avenger® Low Temperature Hydraulic Fluid is specially
formulated to prevent freeze-up of all hydraulic systems.
Uniquely blended to prevent internal corrosion and oxidation
of the hydraulic system.
Available in convenient quart bottles and economical
five gallon pails. Arctic Avenger® Hydraulic Fluid will keep
your hydraulic units up and running.
by J.Thomas
• Broom and Sweepers
• Utility Buckets and Lifts
Ideal Applications
See Page 335 for Arctic Avenger® Hydraulic Fluid
*Plus Freight
Order No. 1306900
$184.27
• Includes Western/Fisher
and Meyer/Diamond harness adapters
• Integral diagnostics for easy field
troubleshooting
• Easy-grip hand held design
• Large Buttons for ease of use
• “Smart” output channels prevent failure
in case of overload or short circuit
• Reprogrammable in seconds to control
multiple plows as needed in the field
NEW!
UNIVERSAL PLOW CONTROLLER
Do you need another J. Thomas Master Catalog?
Just go to www.j-thomas.com - click “Free Catalog”
Or call us at 800 828 7980 and ask for one.
Don’t See it? Call us at 800 828 7980 and ask!